@levis78 add those flags on the same line as pixelweb. If you're around tomorrow, I can help you live, that may be faster than back and forth here

use this command to find out what port Pixelcade is on . Unplug your other USB device before doing that ls /dev/ttyACM*

here's what you want if you have the Pixelcade P2.5 size (DMD size) , then add this flag -swapbluegreen I would try that first and if still confl...

follow the instructions here that will get you the latest pixelcade software for RetroPie then look for the pixelweb line in this file /opt/retro...

had another guy with a similar issue, what is the other USB device? make sure you have the latest pixelcade software here/p> and then what you mig...

the artwork update script will overwrite all existing files in the repo. Any new files you've added that have a different file name won't be touched b...

you'll see where the indicator light should be hereIf no indicator light and you've verified your 12V power supply is good, then it would appear the b...

nice!

i'd first give this a shot/p> then if no luck, open it up and see if there is a red indicator light on the back of the PCB board

looks great! thanks for sharing

for Pixelcade marquees, you can have an LCD based and LED marquee at the same time but not two LCDs or two LEDs, i'm not sure I'm following getting yo...

what version of pixelcade are you on, 4.x or 5.x ? on 4.x. either way, pixelcade does not do a port scan, that is only on linux (for which there is a ...

not sure, i'll need to play with that. I know some other guys were able to achieve some different results using pop up media manager, perhaps give tha...

good to know, thanks. have not tired with the latest, will take a bit before can get to that one